RapidWireTM Welded Wire Tool Crib MATERIAL SPECIFICATIONS
PANELS - shall be constructed of 1-1/4" x 3" welded mesh, 10 gauge vertical wires securely welded to 8 gauge horizontal wires. Each panel has two 1-1/4" x 1-1/4" x 13 gauge roll formed angles welded along its length. Panels mount to post with metal band and self tapping screw.
POSTS - shall be made of 2" x 2" x 14 gauge steel tubing. Base plates of 2" x 7" x 1/4" steel flat with two 7/16" round holes for floor anchoring, are welded to each. Top of post is finished with decorative plastic cap. Posts have factory drilled pilot holes to accept self tapping screws.
DOORS - shall be constructed of 1-1/4" x 3" welded wire mesh, securely welded into a 1-1/4" x 1-1/4" x 13 gauge steel angle frame. Doors have 10" x 16 gauge steel plate welded across center. Optional door lock designed to fit into formed center plate. Two horizontal, (and for hinge doors, two diagonal) stiffeners made of 1/4" x 3/4" flat steel are welded to door frame behind the mesh.
HARDWARE - All erection hardware is supplied with order. Panels attach to posts with 1/4" x 1" self drilling, self tapping screws and metal bands attached to panel border wire. Posts anchor to floor with 3/8" wedge type anchors.
FINISH - Non-plated parts receive one coat of gray acrylic enamel. Other colors and powder coat are available.
