Heavyweight TireBooties™

These TireBooties™ are manufactured the same way the lightweight TireBooties™  but are made of 600 Denier 100% Textured Polyester with a urethane coat, DWR for the strength to last.  Heavyweight TireBooties™  are  made  for tougher interior applications such as forklifts, scissor lifts and  boom trucks all having to enter a building with the  need to protect the floor covering. 

At conventions centers -  riggers have to wrap their tires with carpet or duck tape plus layout shrink wrap before entering the premises to have to protect the flooring during show set up or tear down at convention centers and hotels.  This is a very expensive and time consuming way to protecting the floor covering.

Other Users: Movers, Appliance Installers, Delivery Companies, Construction, Painters, Electricians, Janitorial, Hospitals, Chemical Facilities, Plumbers, Bakeries, etc. all that use heavy motorized equipment and have to enter a building and protect the floor covering.
 

Key Benefits:

• Heavier longer lasting fabric
• No scuff marks on flooring
• TireBooties™ conform to tires with no slippage
• Easy to place on and off
• Save time and money

Sizing: (click here for more help in measuring)

A) Measure from the ground up to the top of the tire
B) Measure the tire tread width
    If your tread measure 4-1/2" use 4-1/2". If the tread width is 4-3/4" use 5".
C) Measure from ground to the bottom of the rim
     This measurement is the key to a good fit. If the height of the tire to the rim is:
      3" to 6" use 3" as your C measurement.
      7" and higher divide by half to get your C measurement (example: 10" high use 5")
To get the diameter of the TireBooties™ take A + B + B + C + C = the diameter of the TireBooties™ to order.
Example:
A) is 24" high
B) is 6.5" wide
C) is 5.5" high
    24 + 6.5 + 6.5 + 3 + 3 = 43" diameter